A mobile crane is a telescopic crane on a road-going chassis. It drives to site under its own power, sets up on outriggers and can lift anything from a roof truss to a bridge beam. It is the most common crane for one-day lifts, and usually the first crane to consider for any lift that is too heavy or too high for a lorry loader.
Typical jobs
Steel erection
Columns, beams and portal frames lifted into place for steel frame buildings and extensions.
Roofing and trusses
Roof trusses, cassettes and roof sheets placed in a fraction of the time it takes by hand.
Plant and HVAC
Air handling units, chillers and generators lifted onto roofs and into plant rooms.
Modular and precast
Modular buildings, precast stairs, panels and beams set directly from the delivery lorry.
Types of mobile crane
City cranes are short, manoeuvrable cranes designed for urban sites. They fit down narrow streets, set up in a small space and often have a low overall height for working under bridges or inside buildings.
All-terrain cranes are the workhorses of UK crane hire. They drive on the road at normal speeds, have all-wheel steering for tight sites, and come in sizes from 40 to over 500 tonnes. Larger ones travel with extra lorries carrying counterweight.
Truck-mounted cranes use a standard lorry chassis. They are economical for lighter lifts where the site is easy to reach.
Mobile tower cranes combine the reach of a tower crane with the convenience of a mobile crane. They are ideal for lifting over a row of houses into a back garden.
How a mobile crane lift runs
- Sizing. We check the load, radius and height against load charts and choose the smallest crane that does the job safely.
- Site check. Ground conditions, overhead cables, underground services and outrigger loads are assessed. Bigger lifts get a site visit.
- Set-up. The crane arrives, the outriggers go out onto mats or timber, and the operator rigs the hook block. This usually takes under an hour.
- Lifting. A slinger-signaller attaches the load and directs the operator. On a contract lift the Appointed Person’s lift plan sets out every step.
- De-rig. The crane packs down and leaves, usually the same day.
CPA hire or contract lift?
With CPA hire you get the crane and operator, but you are responsible for planning and supervising the lift and you must provide an Appointed Person. With a contract lift the crane company takes that responsibility. If you do not have your own lifting team, choose a contract lift.
Mobile crane sizes
Typical figures for each class. Exact capacity depends on the model and the radius of the lift, so we size every crane from your load and the reach needed.
| Class | Capacity | Max hook height | Axles | Typical jobs |
|---|---|---|---|---|
| City / compact | 25 – 60 t | 30 – 45 m | 2 – 3 | Tight streets, low headroom, urban infill |
| Small all-terrain | 40 – 60 t | 40 – 50 m | 3 – 4 | Trusses, steel, HVAC, domestic and commercial |
| Medium all-terrain | 80 – 130 t | 55 – 70 m | 4 – 5 | Heavier steel, precast, modular buildings |
| Large all-terrain | 200 – 500 t | 70 – 100 m | 6 – 9 | Bridges, wind, heavy plant (with ballast lorries) |
| Mobile tower crane | 4 – 10 t | 30 – 50 m | 4 – 5 | Long reach over buildings from a small footprint |
