Behind every crane and every sling is a set of standards that decide how it is designed, tested, marked and inspected. This guide explains how UK law and the main British, European and international standards fit together.
Two layers: law and standards
Laws say what must be achieved: equipment must be safe, suitable and examined. Standards describe how to achieve it, in technical detail. In the UK:
- Design and supply of new machinery is covered by the Supply of Machinery (Safety) Regulations 2008. Equipment meeting the relevant “designated” standards is presumed to comply, and carries UKCA or, in many cases, CE marking.
- Use of equipment is covered by LOLER 1998 and PUWER 1998, with BS 7121 as the code of practice for cranes. See crane safety regulations in the UK.
Key design standards for cranes
| Standard | Covers |
|---|---|
| BS EN 13000 | Mobile cranes, including rated capacity limiters and stability |
| BS EN 14439 | Tower cranes |
| BS EN 12999 | Loader cranes (lorry loaders / HIABs) |
| BS EN 13001 | General design principles for cranes |
These standards require safety devices such as rated capacity limiters, overhoist protection, emergency stops and slew and luffing limits.
Standards for lifting accessories
| Standard | Covers |
|---|---|
| BS EN 1492 | Textile slings: flat webbing and roundslings |
| BS EN 13414 | Wire rope slings |
| BS EN 818 | Short-link chain and chain slings |
| BS EN 13889 | Forged steel shackles |
| BS EN 13155 | Non-fixed lifting attachments such as spreader beams and vacuum lifters |
Each accessory must be marked with its safe working load and identification, and supplied with a declaration of conformity.
International (ISO) standards
ISO standards, such as the ISO 4301 classification of cranes and the ISO 9927 guidance on inspections, sit behind many European standards and are used in global supply chains. Equipment imported from outside Europe may be built to other standards, such as US ANSI/ASME; it must still meet UK requirements before it is supplied or used here.
Industry guidance
Alongside formal standards, UK practice is shaped by:
- CPA (Construction Plant-hire Association) technical guidance and model hire conditions
- Strategic Forum and industry best-practice guides, for example on tower cranes and lifting near the public
- LEEA (Lifting Equipment Engineers Association) guidance on accessories and examinations
- ALLMI guidance and training for lorry loaders
What this means when you hire a crane
You do not need to know every standard. But you should expect the crane company to provide:
- a current thorough examination report for the crane and accessories
- equipment that is marked and fit for purpose
- competent, carded operators and crew
On a contract lift, the crane company manages all of this for you.
